website design
By
 
 
 
THE MOST COST EFFECTIVE ENERGY SAVING PRODUCT FOR SWIMMING POOLS
Heatsaver Dramatically Reduces Evaporation   Energy Savings with Heatsaver
Less evaporation means: Savings on:
less heat loss - less humitidy - water heating.
less air conditioning - less chemical loss Dehumidification.
Less water loss - Less CO2 emissions Air heating.

 
The Liquid Pool Cover
Heatsaver is a harmless bio-degradable liquid, which forms a transparent monomolecular layer over the surface of a swimming pool whenever it is calm and inhibits the evaporation from the surface of the pool, either indoor or outdoor.
The following example on this smaller outdoor pool is to demonstrate the effectiveness of our product, as you can see the evaporation is where the heat is being lost and it works equally well on all sizes of indoor or outdoor swimming pools 24 hours a day.
     
Before Treatment       After Treatment        
Heat loss through evaporation   Heatsaver stops the evaporation and heat loss. Saves you money and time with convention pool covers  
   
Available 24 hours a day Heatsaver works automatically whenever the pool water conditions allow, unlike conventional covers which can only be applied when the pool is closed - and the pool water doesn’t have to be completely still for Heatsaver to work - Consequently Heatsaver adjusts perfectly to changing activity levels in the pool throughout the day and night.
The swimming pools that have quiet periods or that have varying loads will still benefit from the Heatsaver cover even during opening hours.
A simple dosing unit is provided to inject heatsaver into the main supply line to the pool.
Indoor Pools    
With the complexity of pool and building management, the cost and demand on energy systems maintenance couldn't be greater. As you can see from the diagrams below Heatsaver actually reduces the demand on plant room equipment whilst also reducing running costs and CO2 emissions.
   
 
 

Heatsaver enables any swimming pool to reap the unquestionable energy saving benefits of a pool cover without any of the aesthetic or practical disadvantages. Heatsaver even works when the pool is occupied in the areas of undisturbed water, it is transparent and undetectable, it is tasteless, ordourless and leaves no residues. See Product information for further details.
Independent Health and Safety reports show it non-toxic, bio-degradeable and does not react with chemicals in the water. Heatsaver has been in use in swimming pools all over North America and The United Kingdom for over 10 years and has had a safe and enviable record.
 
  Heatsaver Automatic Dosing System   System Diagram

The system is very easy to install as can be seen in the diagram. The injection system is fully programmable and provides an accurate method of ensuring the correct dosage into the pool at the right time.
Once the set up for the correct dosage for the size of pool is complete, it only requires a periodic check of the level of fluid in the reservoir.
simple installation
 
Heatsaver Dosage

The required daily amount of heatsaver is calculated at just 0.8millilitres per Square Metre.
This forms a physical liquid barrier between water and air, dramatically reducing evaporation where between 70 to 90% of heat is normally lost.
 
Example of a Leisure Pool using Heatsaver
In this particular case a 38% saving has been made. Click here for further information.
Simple to fit but effective in use.
Heatsaver
News Bulletin
  
   
25.02.2010 new website launch for heatsaver in Sweden. more info
 
Report on Heatsaver at Wrexham leisure centre more info